李棒,何亚峰,朱延松,汪思鹏

• 1:安徽理工大学机电工程学院
• 2:常州工学院航空与机械工程学院
• 3:合肥综合性国家科学中心能源研究院(安徽省能源实验室)

摘要(Abstract)：

由于GH4169高温合金热导率低、在高温下能保持很高的强度，导致铣削加工过程中切削温度高、切削力大.为此，采用可转位双刀片-双阴极铣刀，对GH4169高温合金表面进行电解辅助微铣削加工，探究在不同加工参数下电解辅助微铣削表面质量的变化规律，并对传统铣削和电解辅助微铣削试验结果进行对比.结果表明，电解辅助微铣削可以去除传统铣削表面的刀痕、点蚀和碎屑等缺陷，同时出现了腐蚀凹坑和晶界腐蚀缺陷；相较于传统铣削，电解辅助微铣削可以显著提高加工表面质量；电解辅助微铣削表面粗糙度和表面残余应力随加工电压的增大而减小，为获得较好的加工表面质量，应选择较大的加工电压水平.

关键词(KeyWords)： 电解辅助微铣削;高温合金;表面质量;表面粗糙度;表面残余应力

Abstract:

Keywords:

基金项目(Foundation): 江苏省自然科学基金面上项目(BK20211061);; 安徽高校协同创新项目(GXXT-2022-019)

作者(Author): 李棒,何亚峰,朱延松,汪思鹏

DOI: 10.16393/j.cnki.37-1436/z.2024.02.008

参考文献(References)：

• [1]Xue C,Chen W Y.Adhering layer formation and its effect on the wear of coated carbide tools during turning of a nickel-based alloy[J].Wear,2011,270(11):895-902.
• [2]Ren X D,Zhan Q B,Yuan S Q,et al.A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169[J].Materials&Design,2014,54(2):708-711.
• [3]Chen N,Yuan Y,Guo C,et al.Design,optimization and manufacturing of polycrystalline diamond micro-end-mill for micro-milling of GH4169[J].Diamond and Related Materials,2020,108:107915.
• [4]Kumar M S K,Gurudatt B,Reddappa H N,et al.Parametric optimization of cutting parameters for micro-machining of titanium Grade-12 alloy using statistical techniques[J].International Journal of Lightweight Materials and Manufacture,2022,5(1):74-83.
• [5]Woo W S,Lee C M.A study of the machining characteristics of AISI 1045 steel and Inconel 718 with a cylindrical shape in laser-assisted milling[J].Applied Thermal Engineering,2015,91:33-42.
• [6]Li C P,Xu M R,Yu Z,et al.Electrical discharge-assisted milling for machining titanium alloy[J].Journal of Materials Processing Technology,2020,285(1):116785.
• [7]Yue X K,Qu N S,Niu S,et al.Improving the machined bottom surface in electrochemical mill-grinding by adjusting the electrolyte flow field[J].Journal of Materials Processing Technology,2020(276):116413.
• [8]Roy S,Bhattacharyya A,Banerjee S.Analysis of effect of voltage on surface texture in electrochemical grinding by autocorrelation function[J].Tribology International,2007,40(9):1387-1393.
• [9]Van Camp D,Bouquet J,Qian J,et al.Investigation on hybrid mechano-electrochemical milling of Ti6Al4V[J].Procedia CIRP,2018,68:156-161.
• [10]Van Camp D,Qian J,Vleugels J,et al.Experimental investigation of the process behaviour in Mechano-Electrochemical Milling[J].Cirp Annals,2018,67(1):217-220.
• [11]Van Camp D,Qian J,Vetrano M R,et al.Investigation of working gap phenomena in Mechano-Electrochemical Milling[J].Procedia CIRP,2020,95:672-677.
• [12]Wang M L,Qu N S.Investigation on material removal mechanism in mechano-electrochemical milling of TC4 titanium alloy[J].Journal of Materials Processing Technology,2021,295:117206.
• [13]Wang M L,Liu T,Qu N S.Interaction between Electrochemical Machining and Conventional Milling in Mechano-Electrochemical Milling of TC4 Titanium Alloy[J].Journal of The Electrochemical Society,2022,169(5):053506.
• [14]中国国家标准化管理委员会.高温合金和金属间化合物高温材料的分类和牌号：GB/T 14992-2005[S].北京：中国标准出版社，2005.
• [15]夏劲武.高温合金GH4169电解加工和电火花加工表面质量研究[D].南京：南京航空航天大学，2008.
• [16]Guo P ,Lin X ,Xu J ,et al.Electrochemical Removal of Different Phases from Laser Solid Formed Inconel 718[J].Journal of the Electrochemical Society,2017,164(7):151-157.
• [17]朱育权，马保吉，D.J.Stephenson.ELID超精密磨削砂轮表面氧化膜形成过程的建模和仿真[J].工具技术，2008(05):11-14.