基于加压酸浸锰烟尘过程中固-液两相流体力学特性CFD模拟CFD Simulation of Solid-Liquid Two-Phase Fluid Mechanics Characteristics During Pressurized Acid Leaching of Manganese Dust
张强,梅洋,谢红艳
摘要(Abstract):
将欧拉-欧拉(E-E)双流体模型、颗粒动力学理论(KTGF)与k-ε湍流模型耦合,以搅拌速度、固相体积分数为变量探究对釜体内液相速率、液相湍流动能的影响.结果表明:釜体内的液相速率、湍流动能与搅拌速度成正相关,且与固相体积分数的大小成负相关.当固体体积分数为2.5%、7%、13%,对应液相速度下降幅度为8%,16.2%,18.4%,对应湍动能下降幅度为7.6%,13.2%,20.6%.
关键词(KeyWords): 固-液相;CFD;计算流体力学;颗粒动力学理论
基金项目(Foundation): 国家自然科学基金(51764007);; 河南省重点学科资助项目(2022KYXM01)
作者(Author): 张强,梅洋,谢红艳
DOI: 10.16393/j.cnki.37-1436/z.2024.02.012
参考文献(References):
- [1]Zheng Y,Zhu J X,Wen J,et al.The axial hydrodynamic behavior in a liquid-solid circulating fluidized bed[J].Canadian Journal of Chemical Engineering,1999,77(2):284-290.
- [2]Lettieri P,Di Felice R,Pacciani R,et al.CFD modelling of liquid fluidized beds in slugging model[J].Poeder Technology,2006,167:94-103.
- [3]Carletti C,Montante G,Westerlund T,et al.Analysis of solid concentration distribution in dense solid-liquid stirred tanks by electrical resistance tomography[J].Chemical Engineering Science,2014,119:53-64.
- [4]Murthy B N,Ghadge R S,Joshi J B.CFD simulations of gas–liquid–solid stirred reactor:prediction of critical impeller speed for solid suspension[J].Chemical Engineering Science,2007,62(24):7184-7195.
- [5]Zbyněk K,Jahoda M,Ivan F.CFD prediction of gas-liquid flow in an aerated stirred vessel using the population balance model[J].Chemical and Process Engineering,2014,35(1):55-73.
- [6]Buffo A,Vanni M,Marchisio D L.Multidimensional population balance model for the simulation of turbulent gas-liquid systems in stirred tank reactors[J].Chemical Engineering Science,2012,70:31-44.
- [7]Tenneti S,Garg R,Subramaniam S.Drag law for monodisperse gas–solid systems using particle-resolved direct numerical simulation of flow past fixed assemblies of spheres[J].International Journal of Multiphase Flow,2011,37(9):1072-1092.
- [8]Guida A,Nienow A W,Barigou M.PEPT measurements of solid–liquid flow field and spatial phase distribution in concentrated monodisperse stirred suspensions[J].Chemical Engineering Science,2010,65(6):1905-1914.
- [9]Angelique D,Celine L,Sebastien C,et al.Solid-liquid suspension of microcarriers in stirred tank bioreactor–Experimental and numerical analysis[J].Chemical Engineering Science,2018,180:52-63.
- [10]邓磊,李瑞宇,黄笑乐,等.基于正交试验的曳力模型改进研究[J].华中科技大学学报(自然科学版),2024,52 (04):1-9.
- [11]赵清风,周洲,李明浩,等.分布式动力翼-诱导翼面的推进-气动耦合模型[J].航空学报,2024,45 (06):1-16.
- [12]蔡国庆,刁显锋,杨芮,等.基于CFD-DEM的流-固耦合数值建模方法研究进展 [J].哈尔滨工业大学学报,2024,56 (01):17-32.
- [13]林俊杰.化学链燃烧过程中流动与反应的多尺度数值模拟[D].杭州:浙江大学,2022.
- [14]安敏.颗粒及内构件对浆态床反应器内流体力学和反应行为的影响[D].北京:中国科学院大学(中国科学院过程工程研究所),2021.
- [15]Wadkernar D,Tade M O,Pareek V K,et al.CFD simulation of solid–liquid stirred tanks for low to dense solid loading systems[J].Particuology,2016,9(6):16-33.
- [16]Guida A,Nienow A W,Barigou M.PEPT measurements of solid–liquid flow field and spatial phase distribution in concentrated monodisperse stirred suspensions[J].Chemical Engineering Science,2010,65(6):1905-1914.
- [17]Derksen J.Numerical simulation of solids suspension in a stirred tank [J].AICh E Journal,2003,49 (11):2700-2714.
- [18]史书舟,周荣涛,杨宁.浆态床内固含率轴向分布的数值模拟[J].过程工程学报,2018,18(2):258-264.
- [19]张强.基于加压酸浸锰烟尘过程搅拌釜内CFD数值模拟[D].贵阳:贵州大学,2020.
- [20]高威,张强,张震,等.基于湿法冶金过程中气-液两相流体力学特性的CFD模拟[J].有色金属(冶炼部分),2021(02):7-19.
- [21]付正强.卧式双轴搅拌釜内固液两相流的数值模拟与实验研究[D].天津:天津大学,2014.